|
| |
■ | This intelligent controller, adopting function block programming, having large programming capacity, being f reely |
| fprogrammed according to different users and different fields, can run at your desired time table and the RTC |
| accuracy can reach second and makes your time control more accurate. And up to 128 time sessions can |
| be set , especially suitable for time-control system. |
■ | Safety password function makes your program absolutely safe. Before writing program, password can be set. And only |
| after entering the correct password, can the program be modified. |
■ | It is equipped with a removable, convenient and programmable LCD, providing 64 friendly human-machine interfaces, |
| 32 virtual keys, having the function to display the alarming message and parameter and to modify the parameter. |
| When needed, it can be installed. And when not needed, it can be removed and replaced with an ordinary front panel. |
| Thus the cost will be greatly reduced. |
■ | The input can receive not only the digital input but also the analogue input to perform the control and . transmission of |
| fthe temperature, moisture, pressure, flow level unit and so on. |
■ | It has well-featured and compact design with 14 point input and 8 point output. Equipped with expansion module, it can |
| be expanded into 82 I/O better ,and to MAX 122I/O.It can be connected with telephone voice module and remote control |
| module to perform the notification and alarming function. And the connection between the host and the module can |
| be Bridge SR-CBA or flexible connection SR-ECBA. |
■ | The machine has short-circuit protection (internal) and relay output protection (external) function, which makes your |
| usage safer and easier. |
| |
| |
Power supply | Power | DC12V-24V | Input parameters: | Input No | 8(A0-A5,B4-B5) | Digital input | 8(A0-A5,B4-B5) | Analogue input | 6(A0-A5) | Power range | DC0-24V(digital)/DC0-10V(analogue) | Input signal0 | DC0-5V | Input signal1 | DC10-24V | Output parameters: | Output No | 4(QA0-QA3) | Output type | Transistor (PNP)output | Output voltage | DC0-24V | Output current | 2A | Environment temperature: | Running temperature | -20℃~70℃ | Storage/shipment | -40℃~70℃ | Switch frequency: | Mechanism | 10Hz | Resistor/light load | 2Hz | Sensitive load | 0.5Hz | Other parameters: | Clock buffer memory at 25℃ | 80h | RTC accuracy | Max±5s/day | Protection | IP20 | Emission on line | EN55011(B) | The main frequency range | 47-63Hz | Function block No | 128个 | Program storage capacity | 64K | Isolation intensity | IEC1131 |
|
|
|